Monitoring of operating parameters at gas facilities, hydro and pneumatic systems, water treatment and heat supply systems, boiler automation, water utility automation and heating points, where increased pressure measurement accuracy is required.
|Gauge pressure measuring ranges
||Measuring ranges for absolute pressure
||Temperature measuring ranges
|0 - 40 kPa
||0 - 160 kPa
||-40 °С...+ 85 °С
|0 - 400 kPa
||0 °С...+ 135 °С
|0 - 600 kPa
|0 - 1.0 MPa
|0 - 1.6 MPa
|0 - 2.5 MPa
|0 - 4.0 MPa
- Data transmission to the collection server using GPRS or NB-IoT technology.
- Measurement of absolute pressure of media, neutral to stainless steel AISI 316L (AISI 304S) (gases, steam, water, slightly aggressive liquids).
- Permissible overload 1.5 Рmax.
- Battery life up to 5 years (depends on the frequency of measurements and data transmission).
- The guaranteed number of data transmission sessions to the data collection server is 5,000, 7,500, 10,000.
- The possibility of charging the internal battery by the service department.
Online monitoring and alarm notifications
- The sensor will reliably inform you about the state of pressure and temperature in the resource supply networks.
- The measured data, according to a specified schedule, is automatically transmitted via GSM / GPRS / NB-IoT to a secure collection server.
- The device receives from the server the setpoint values (pressure and temperature range), when exceeding which, the dispatcher receives an interactive message and must take actions according to the regulations.
- The system keeps a record of all events and actions taken.
Easy sensor installation and use
- Structurally, the device is made in a single housing, which contains a sensitive element and an electronic conversion unit.
- The device is installed in the same way as for a conventional pressure gauge.
- Thanks to its compact and robust design as well as the explosion-proof housing (device version EX), the sensor can be used in harsh and hazardous environments.
Configurable device parameters
- The dispatcher configures the measurement frequency for each device, the schedule for transmitting data to the server, and boundary values for out-of-order data transmission.
- For each channel, you can set the minimum and maximum alarm thresholds.
Secure server for data collection and processing
- The data collection and processing server is implemented on the basis of the domestic platform Astra Linux Special Edition, certified in accordance with the security requirements of the FSB, FSTEC of Russia for operating systems.
- Server software is provided free of charge for the entire period of operation of the device.
- There is no need to purchase additional licenses.